Home / Blog / Defense Entry Board Spec

Military & Aerospace PCB Entry Board: What the Spec Actually Demands

Entry Board Guide · 2026-10-31 · 6 min read

On defense and aerospace builds the entry board is qualified like any other flight-critical item: revision-controlled datasheet, per-lot COA, batch traceability and a material declaration. 1100 H18 is the standard entry; coated grades locate the dense RF and avionics vias.

Defense-grade boards are drilled once and expected to run for the life of the platform — often 20+ years through thermal shock and vibration — so the consumable must hold stable geometry after long, sometimes harsh, storage.

The material is rarely the difficult part; the paperwork is. Specify the alloy (1100 H18), temper, thickness and coating in a revision-controlled datasheet so the qualified baseline is a fixed object. Defense & aerospace drilling materials · entry board definition.

Military aerospace PCB entry board specifications traceability — YUESHAN
YUESHAN 1100 H18 entry board supplied with per-lot traceability for qualified programs.

Defense and aerospace PCBs are drilled once and expected to run for the life of the platform. On these builds the entry board is not a packaging sheet — it is a qualified consumable, and the program will ask for evidence that the sheet going into the stack is the same sheet that was qualified, lot after lot.

The paperwork is the spec

A program that must demonstrate control of a qualified process asks for evidence that the consumable is stable. The list below is what that evidence consists of, and what invalidates each part:

DocumentWhat it provesWhat invalidates it
Revision-controlled datasheetthe grade's specified values, with a revision number and dateany change to a specified value without a revision
Per-lot COAthe delivered lot was measured against those valuesdelivery without a lot-matched COA
Batch traceability statementrun, incoming raw-material batch and date behind each shipped lota break in the chain — stock shipped without its run record
Material declarationsubstance content against RoHS and any program-specific lista formulation or coating change

Entry board material choices

Two grades cover the defense stack:

Phenolic is kept for specific routing worktables and IC jobs — available on request, not our primary push for defense.

Standards the program expects

Entry and backup materials for defense and aerospace are supplied against the same quality system as the board: ISO 9001 manufacture, REACH/RoHS declarations, and — where the program flows them down — IPC-6012 / IPC-A-600 acceptance and AS9100 / IPC-6012DA references. YUESHAN ships full lot traceability with every order and offers long-term grade locking so a qualified set never drifts.

For the matched backup and back-drill side see the defense & aerospace drilling materials hub and the back-drilling guide.

Military aerospace entry board specification diagram
The defense-grade entry board evidence package: datasheet, COA, traceability, declaration.
Material">Entry

1100 H18 Aluminum Entry

0.15–0.20 mm, per-lot COA

material →
Material">Coated

Lubricant-Coated Entry

For dense RF / avionics vias

coated →
Hub">Defense

Defense & Aerospace Drilling

Matched backup + back-drill

defense hub →
Resource">Back-drill

Back-Drilling Principle

Stub control for radar links

back-drill →
← Back to Blog Request Free Samples →

Frequently Asked Questions

YUESHAN supplies traceable, high-reliability drilling consumables with lot-level documentation to fabricators in 30+ countries since 2011. The questions below cover the documentation, standards and grade control a defense or aerospace program expects.

What documentation does a defense or aerospace program expect with entry/backup material?

A revision-controlled datasheet, a per-lot Certificate of Conformance (COA), a batch-traceability statement, and a material declaration (RoHS/REACH where it flows down). This matches the defense-grade evidence package described by Aegis PCB and SFCircuits (MIL-PRF-31032, AS9100, IPC-6012 Class 3). YUESHAN ships full lot traceability and material declarations on request.

Why is traceability more important than the material itself in military PCB drilling?

On defense and aerospace builds the program must prove the consumable going into the stack is the same one that was qualified, lot after lot; a break in the chain invalidates acceptance. YUESHAN supplies each lot with its run record and a lot-matched COA so the qualified baseline stays a fixed object.

Which standards apply to military/aerospace PCB drilling materials?

Typically IPC-6012 Class 3, AS9100 (aerospace quality management), ISO 9001 as a baseline, and for U.S. programs MIL-PRF-31032; ASTM E595 outgassing compliance applies to space-bound builds. Material lots should carry COA and traceability per these specs.

What entry board grade does YUESHAN recommend for defense and aerospace?

For large-format avionics panels, 1100 H18 aluminum entry as the standard; for dense RF and avionics fine vias, a lubricant-coated aluminum entry for precise location; pairing with UV melamine 950 backup (anti-warp, about 20% below laminate cost) and back-drill aluminum for radar/comms stub control. All supplied with full lot traceability.

How do I keep a qualified material set from drifting?

Use long-term grade locking so the specified alloy, temper, thickness and coating stay fixed, and require a revised datasheet revision for any tolerance move. YUESHAN offers grade locking and engineering support across the full stack-up for qualified programs.

Can YUESHAN support ITAR or export-controlled defense programs?

YUESHAN supplies traceable, high-reliability drilling consumables with lot-level documentation; export-control and program-specific handling (for example ITAR where it applies) should be confirmed with your procurement and compliance team — YUESHAN provides the material evidence package (datasheet, COA, traceability, declarations) to support qualification.

LX

Mr. Lucky Xu — Director, YUESHAN PCB — Director, YUESHAN PCB

15 years in PCB drilling consumables. Wrote and technically reviewed this page; where a number is stated, the page says how it was measured, and any third-party or industry reference (Chalco, GoPCBA, IPC) is named inline rather than presented as a YUESHAN specification.

About the author · Editorial standards & review process · Request TDS / SDS or a sample